How to Make Melt-and-Pour Soap at Home
If you can melt, stir, and pour, you can make your first batch of soap. Melt-and-pour starts with a premade soap base. You melt it, add your scent and color, and pour it into a mold. The Strawberries & Cream Goat’s Milk Soap Making Kit makes 4–6 bars and takes about 30–45 minutes of hands-on crafting, plus time for the soap to set.
1. Set out your supplies
Put your silicone mold on a flat surface. Set out the soap base, fragrance, coloring, rubbing alcohol spritz bottle, and instruction card. Have a heat-safe container and a stirring utensil ready.
2. Melt the soap base
Cut the base into small, similar-sized pieces so they melt evenly. Follow the timing and heating directions on your kit’s instruction card. If you’re using a microwave, choose a microwave-safe container and heat in short bursts, stirring between bursts.
How to melt soap without a microwave
Use a double boiler or set a heatproof bowl securely over a saucepan of gently simmering water. Keep the bottom of the bowl above the water. Stir gently as the soap melts and keep water out of the base. Use oven mitts when lifting the bowl and watch for hot steam.
3. Add color and fragrance, then pour
Take the melted base off the heat. Follow your kit’s instructions for when and how much color and fragrance to add. Stir gently, pour into the mold, and follow the card’s directions for using the rubbing alcohol spritz on surface bubbles. Keep rubbing alcohol away from heat and open flames.
4. Let the bars set
Leave the mold on a level surface until the soap is completely firm, using the instruction card’s setting time as your guide. Flex the silicone mold gently to release the bars.
Browse the beginner soap making kits to pick your first batch. Already have a mold and rubbing alcohol? Try the soap making refill kit to make another batch with the supplies you have.
